Minicrop Hydraulic Ironworker

The Geka Minicrop metal working machine is one of three Geka hydraulic ironworker models featuring a single cylinder. It includes all the same features as the Microcrop model.

Additionally, the Minicrop metal working machine also includes a wide range of openings for cutting round and square bars and a gooseneck die-holder for punching profiles and legs and webs. The Geka Minicrop, for sale at any of our distributors and dealers, may also be fitted with a wide range of tools and accessories for notching and punching.

Features and specifications of the Geka Minicrop single-cylinder ironworker

Features and specifications of the Geka Minicrop single-cylinder ironworker

  • L cutting system at 90º without deformation. Wide range of openings for round and squared-cut without deformation.
  • Goose neck die-holder for punching of D and E sections in legs and web for U and I profiles.
  • Blade for flat bar with unique radial geometry for shearing with minimum deformation.
  • Rectangular notching equipment with precision machined worktable and scaled stops.
  • Optional Blades for shearing D and E section up to 4″ with distortion.
  • Possibility of mounting a wide range of optional equipment for notching and punching.
  • This model can be offered in 220V Single Phase version.
FEATURESMINICROP
Punching Power50 US Tons
PunchingØ1-1/16″x1/2″
Shears for section iron L at 90º3″ x 3″x 5/16″
Cutting of Flat Bars10″x3/8″ & 8″x1/2″
Notching 2″x1 1/2″x1/4″
  • Capacities based on a material resistance of 65,000 tensile.
  • The manufacturer reserves the right to make modifications without prior notice.

Main Features of the Geka Minicrop Ironworker

Cutting of angles.
Punching station with gooseneck holder.
Rectangular notching.
Shears for flat bars with a table graduated with degrees and two guide bars.

One Cylinder Ironworkers main features.

Max Punching ØFlat Bars ShearingBars ShearingAngle cut 45ºAngle cut 90ºNotching
Microcrop1 1/16” x 3/8”13 3/4” x 1/4”
8” x 1/2”
13¾” x ¼”
8” x 1/2”
3” x 3” x 5/16”
Minicrop1 1/16” x 1/2”10” x 3/8”
8” x 1/2”
10″x3/8
8” x 1/2”
3” x 3” x 5/16”2″x1½”x¼”
Multicrop1-1/16″ x 3/8″10” x 3/8”
8” x 1/2”
10″x3/8
8” x 1/2”
2 1/4” x 2 1/4” x 1/4”3” x 3” x 5/16”2″x1½”x¼”
CONFIGURATIONMICROCROPMINICROPMULTICROP
L  90ºYESYESYES
L  45º2 legs1 legs2 legs
Flat bar
YESYESYES
PunchingYESYESYES
NotchingOptional for punching stationYESYES
BendingOptional for punching stationOptional for punching stationOptional for punching station
Electric StopPre InstallationPre InstallationPre Installation
  • Capacities based on a material resistance of 65,000 tensile.
  • The manufacturer reserves the right to make modifications without prior notice.

Services for your Minicrop Ironworker.

Choose below the service you want to contact with.

Sales Consultant
Ask our experienced sales consultants to provide you extensive information and advice.
Brochure Request

You can ask for any brochure or information about any of our products.

Technical Support

Ask for technical support or service to our GEKA qualified engineers.

Manuals Request

You can request our free manuals for your machine or GEKA or original tool.

Share This