Multicrop Hydraulic Ironworker

Hydraulic ironworker machine with a specialized use in cutting angles at 45º

The Geka Multicrop metal working machine is the most versatile out of the three models of Geka single-cylinder hydraulic ironworkers. It offers all the features as the Minicrop model but with the addition of a special station for cutting angles at 45º, on angular profiles leg in and leg out. Its punching power is of 50 US tons.

The Geka Multicrop metal working machine can also be acquired in a 220V Single Phase version. Geka optional peripherals and tools are also available to be mounted on the machine for performing a wide range of ironworking tasks.

Features and specifications of the Geka Multicrop Metal Working Machine

FEATURES MULTICROP
Punching Power 50 US Tons
Punching Ø 1-1/16″ x 1/2“
Shear for flat bars 10″ x 3/8“
8″ x 1/2“
Shears for section iron L at 90º 3″ x 3″ x 5/16“
Shears for section iron L at 45º 2-1/4″ x 2-1/4″ x 1/4“
Notching 2″x 1-1/2″x1/4“
  • Capacities based on a material resistance of 65,000 tensile.
  • The manufacturer reserves the right to make modifications without prior notice.

Multicrop Hydraulic Machine Main Features

Standard blades for cutting angles
Cutting of round and square bars
Cutting angled sections at 45° on both inside and outside facing legs (the only Geka single-cylinder model with this capability)
Rectangular notching station with precision machined worktable and scaled stops
Flat bar shearing stations with a graduated table marked with degrees and two guide bars. The shearing blades have a unique radial geometry that minimizes the deformation of material.
The machine may also be equipped with optional peripherals, depending on your manufacturing needs.

One Cylinder Ironworkers main features.

Max Punching Ø Flat Bars Shearing Bars Shearing Angle cut 45º Angle cut 90º Notching
Microcrop 1 1/16” x 3/8” 13 3/4” x 1/4”
8” x 1/2”
13¾” x ¼”
8” x 1/2”
3” x 3” x 5/16”
Minicrop 1 1/16” x 1/2” 10” x 3/8”
8” x 1/2”
10″x3/8
8” x 1/2”
3” x 3” x 5/16” 2″x1½”x¼”
Multicrop 1-1/16″ x 3/8″ 10” x 3/8”
8” x 1/2”
10″x3/8
8” x 1/2”
2 1/4” x 2 1/4” x 1/4” 3” x 3” x 5/16” 2″x1½”x¼”
CONFIGURATION MICROCROP MINICROP MULTICROP
L  90º YES YES YES
L  45º 2 legs 1 legs 2 legs
Flat bar
YES YES YES
Punching YES YES YES
Notching Optional for punching station YES YES
Bending Optional for punching station Optional for punching station Optional for punching station
Electric Stop Pre Installation Pre Installation Pre Installation
  • Capacities based on a material resistance of 65,000 tensile.
  • The manufacturer reserves the right to make modifications without prior notice.

Services for your Multicrop Ironworker.

Choose below the service you want to contact with.

Sales Consultant

Ask our experienced sales consultants to provide you extensive information and advice.

Brochure Request

You can ask for any brochure or information about any of our products.

Technical Support

Ask for technical support or service to our GEKA qualified engineers.

Manuals Request

You can request our free manuals for your machine or GEKA or original tool.

Share This